Installation Guide

2
Product introduction
Installation steps
Control the lights
at will
Ultimate
exibility
1. Clean the surface that need to paste.
2. Tear off the 3 M adhesive of the light strip,
and then paste it on a smooth surface.
3. Plug the adapter and the light strip into the
controller respectively.
4. Insert the power adapter into the socket.
After the connection is complete,
it ush with the edge of the controller.
Adapter Controller Plug wire
Bluetooth fast
connection
Networking
Out-of-home
control
Freely cutting
at every 9.84"
Soft lighting Biological
rhythm