Installation Guide 1
Product introduction Adapter Controller Light strip Freely cutting at every 9.84" Basic parameters Power CCT Dimension (inch) Wi-Fi_BLE100-240V@50/60Hz RGBCW-1M-EX DC24V@1A 20W RGB+2200K +6500K 78.7x0.47x0.2 Wi-Fi_BLE100-240V@50/60Hz RGBCW-2M-EX DC24V@1A 20W RGB+2200K +6500K 78.7x0.47x0.2 78.7x0.47x0.2 Model Input Wi-Fi_BLERGBCW-2M 100-240V@50/60Hz DC24V@1A 20W RGB+2200K +6500K Wi-Fi_BLERGBCW-5M 100-240V@50/60Hz DC24V@1A 20W RGB+2200K +6500K 78.7x0.47x0.
Product introduction Control the lights at will Soft lighting Bluetooth fast connection Out-of-home control Ultimate flexibility Biological rhythm Networking Freely cutting at every 9.84" Installation steps 1. Clean the surface that need to paste. Adapter Controller 2. Tear off the 3 M adhesive of the light strip, and then paste it on a smooth surface. Plug wire After the connection is complete, it flush with the edge of the controller. 3.
Instructions 1. Power on the socket, make sure that the phone is connected to the Wi-Fi network in the 2.4GHz band, and turn on the phone’s Bluetooth. 2. Ensure that the device, mobile phone, and router are close to each other. 3. Download and open the App: search for "Smart Life" in the App Store or scan the QR code on the outer packaging/manual to download and install the App. For the first download and use, please click the "Create a new account" button to register.
Safety Precautions 1. Please read the manual carefully before installation, and do not use it under the condition of too high or too low voltage. 2. The light source of this luminaire is not replaceable. When the light source reaches the end of its life, the entire luminaire should be replaced. 3. The light strip will generate heat during work, please keep the surrounding air convection for heat dissipation. 4.
Quick Guide of Using Amazon Echo to Control Smart Devices Value-added Service>Smart Voice>Third Party Tutorial 1. What you need to get started Before using Echo to control your smart devices, make sure you meet the following conditions. Stable Wi-Fi network which could access to Amazon server.(For mainland China users) An Echo device, including Echo, Echo Tap, or Echo Dot. An Amazon account. (If you don’t have an Amazon account, click here to register) Tuya Smart App and a related account. Smart devices.
② ③ You will be redirected to the account link page. Type in your Tuya Smart account and password, don’t forget to select the country/region where your account belongs to. Then tap “Link Now” to link your Tuya Smart account. The country/region, the account, and the password must match with the exact content in Step 2.2. Link with Verificatio nCode, open Tuya Smart App, click “Me–More Services–Alexa”.
3. Control your smart devices through Echo 3.1 Discover devices Echo needs to discover your smart devices before it controls them. After the skill binding is successful, the page as figure1 will Appear automatically. Click “DISCOVER DEVICES” to discover the device, or you can say “Alexa, discover devices” to Echo. Echo will discover devices that have already been added to the Tuya Smart App. You can also tap “DISCOVER DEVICES” to discover the smart devices.
Note:every time you change the device’s name on Tuya Smart App, Echo must rediscover before you control them. 3.2 Control devices by voice commands Now you can control your smart devices through Echo. You can use the following commands to control your devices (e.g., bedroom light): Alexa, turn on/off bedroom light. Alexa, set bedroom light to 50 percent. Alexa, brighten/dim bedroom light. Alexa, set to light to green. Alexa, set bedroom light to warm white.
Quick Guide of Using Google Home to Control Smart Devices Value-added Service>Smart Voice>Third Party Tutorial 1. What you need to get started Before using Google Home to control your devices, make sure you meet the following conditions. A Google Home device, or Android phone with Google Assistant. Latest Google Home App. Latest Google App (Android only). A Google account. The device display language must be set to English US. Tuya Smart App and a related account. Smart devices. 2.
① On the homepage of Google Home App, click the button in the higher left corner, select “+” , select “Setupdevice” under the list of “Add and manage” , and then click “Have something already set up”.
② YFind “Tuya Smart” in the list. In the new window, select your Tuya Smart account’s region, type your Tuya Smart account and password, then tap “Link Now”. After you assign rooms for devices, your devices will be listed in the Home Control page.
3. Control your smart devices through Google Home Now you can control your smart devices through Google Home. Take bedroom light as the example, the supported voice commands are as below: Ok Google, turn on/off bedroom light. Ok Google, set bedroom light to 50 percent. Ok Google, brighten bedroom light. Ok Google, dim bedroom light. Ok Google, set bedroom light to red.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
www.loycco.com Service@loycco.
