Installation Instructions

01 02 03
04 05 06 07 08 09
10 11 12 13 14 15
16 17 18 19
Product maintenance
Cleaning of rolling brush Cleaning of side brush
1.Turn the machine and press the buckle on the rolling
brush cover from both ends to remove the rolling brush.
2.Clean the windings on the rolling brush with the matching
cleaning brush. After cleaning, install the rolling brush and
fasten the cover.
*It is recommended to clean the side brush regularly;
*If the side brush is damaged, please pull out the damaged side
brush directly, and align the new side brush with its bearing and
press firmly.
* It is recommended to clean the rolling brush regularly and replace it
timely as the wear situation.
Rolling brush cover
Side brush
Buckle
Rolling brush
Rolling brush slot
1. Turn the machine, lift the left and right brushes up and pull
them out.
2. Clean the windings on the left and right brushes and their
bearings.
3. Align the side brush with its bearing on the machine and
press firmly to install the left and right brushes.