Installation Instructions

ManualsBrandsDongguan Zhike Intelligent Science and Technology ManualsAppliancesVacuum Cleaner

01 02 03

04 05 06 07 08 09

11 12 13 14 15

16 17 18 19

Product maintenance

Water tank and mop component

Note:

*Press the buckle from both ends and pull out the mop component to remove it.

Sealing plug

Water tank buckle

Charged pole piece

Fixed buckle

Water inlet for mop

Mop buckle

Mop component

Mop buckle

1. If you need to use the mopping function of the robot

vacuum cleaner, please open the machine cover to remove

the dust box.

2. Take the water tank and mop component from the pack-

age.

3. Align the mop component with the buckle position on the

body and install it by pushing horizontally.

4. Open the sealing plug of the water tank to fill in the appro-

priate amount of water. After closing the sealing plug, install

the water tank in the main machine (the position of the origi-

nal dust box).

* Please remove the water tank for filling water, and do not fill

it on the machine.

* Before installing the water tank and mop component, please

dry the water and cut off the power.

Summary of content (11 pages)

PAGE 1
Product maintenance Water tank and mop component 1. If you need to use the mopping function of the robot vacuum cleaner, please open the machine cover to remove the dust box. 2. Take the water tank and mop component from the package. 3. Align the mop component with the buckle position on the body and install it by pushing horizontally. 4. Open the sealing plug of the water tank to fill in the appropriate amount of water.
PAGE 2
Product maintenance Battery Charging stand and charging electrode 1. The high-performance lithium-ion battery pack is built in the machine. And the battery has no memory effect and it is no need to worry about repeated charging/discharging. 2. In order to maintain the best performance, keep the machine charging on the charging stand if it does not work. 3. After the machine is fully charged, please turn it off if it does not work. Keep charging for a long time may damage the battery. 4.
PAGE 3
Product maintenance Sensor Switching of the suction port component and rolling brush component Wipe the various sensors on the main machine with a soft and dry cloth to keep the sensor surface free of dirt and dust. 1. The default configuration of the machine is the rolling brush component, and the suction port component is the optional accessory. 2. Switching method: * Turn the machine, and press the buckle on the rolling brush cover to remove the rolling brush component.
PAGE 4
Product parameters Parameters of main machine Parameters of charging stand PARAMETERS ITEM Item Parameters Dimension L165*W142*H100mm 3.1±0.1KG Rated input 100-240V 50/60Hz 0.8A Connection method WiFi connection Rated output 24.0V/1.0A Rated voltage 14.
PAGE 5
Voice prompts and trouble-shooting If the machine is faulty during operation, the power key quick flashes in red color. Please refer to the following voice prompts or APP prompt to solve the abnormal problem. Sn. Voice prompt Cause Trouble-shooting 1 Uh-oh, the dust box seems disappeared. The cleaning is triggered during removing of the dust box. Re-install the dust box or pause the cleaning task of the machine. 2 Uh-oh, the top radar seems to be blocked.
PAGE 6
Voice prompts and trouble-shooting Sn. Voice prompt Cause Trouble-shooting 12 Uh-oh, the main wheel seems to be stuck, come to help me. The main wheel is stuck or entangled. Please check if the main wheel is entangled and clean it. 13 Uh-oh, the main brush seems to be stuck, come to help me. The main brush is stuck or entangled. Please check if the main brush is entangled and clean it. 14 Uh-oh, the side brush seems to be stuck, come to help me. The side brush is stuck or entangled.
PAGE 7
FAQ Failure Trouble-shooting It cannot be turned on. The battery is low, please charge it before use. The ambient temperature is over low or over high, please use it in the range of 0°C-40°C. It cannot be charged. The charging stand is not powered, please make sure the power is connected successfully. Poor contact of the charging electrode, please clean the charging stand electrode and the machine electrode. The machine cannot be returned for charging.
PAGE 8
Safety information Service restrictions 01. The product is only for the cleaning of the floor in the home environment and do not use it outdoors (such as open balcony), non-ground (such as sofa, coffee table, etc.), commercial or industrial environment. 02. Do not use the product in a suspended environment (such as duplex floors, home tops, etc.) to avoid property damage and personal injury caused by falling of the device. 03. Do not use the product in an environment above 40 ° C or below -10 ° C. 04.
PAGE 9
Safety information Battery and charging 01. 02. 03. 04. Do not use any battery, charging stand or charger from third-party. Please make sure that the voltage used is correct. Do not disassemble, repair or modify the battery or the charging stand. Do not place the charging stand and the main machine close to the heat source, such as heating radiators, induction cookers, ovens, etc. 05. Do not wipe anywhere of the product with a damp cloth or any liquid. 06.
PAGE 10
FCC Caution. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 11
DONGGUAN ZHIKE INTELLIGENT SCIENCE AND TECHNOLOGY CO., LTD. Address: No. 1, First Juxin Road, Qiufu Road, Dalang Town, Dongguan Website: www.yhrobot.