User's Manual

Dongguan Yuetai Electrical Appliances Co.,Ltd.
Room 101,1st Building,No. 5 Lane 1, Xiyu Road,Hengli Town,Dongguan City,Guangdong
province,China
2 / 9
 ECO Mode
1) After activating the appliance, it enters ECO mode by default.
2) In the working state, press the ECO button to enter the setting of ECO mode, then press the
“-” or “+” button to set a target temperature within the range of 41℉ to 97℉ (5°C to
36°C). After that, press the ECO button again to save and quit the setting.
3) ECO mode will automatically control the heating on or off according to the set temperature.
 Manual Mode
During operation, press the or button to enter manual mode and simultaneously
activate the associated low/high heat power to blow. = Low Heat (1000W); = High Heat
(1500W)
 Timer Function
1) The timer function can be set at any time and can work in both ECO mode and manual
mode.
2) In the working state, press the button to enter the timer setting, and then press the “ + ”
or “ - ” button to set the timer within the range from 0 to 24 hours.
 Oscillation Function
In the working state, press the button to let the heater start/stop oscillating.
 Wi-Fi Function
1) When you turn on the heater, the Wi-Fi button will automatically light up and flash, which
means it is ready to pair with the network.
2) If you fail to connect the heater with your smartphone, press the Wi-Fi button and hold it
until it flashes to reset the connection.