Instruction Manual

ManualsBrandsDongguan Yuansheng Zhilian Technology ManualsAudio EquipmentZ3 PRO Bluetooth listening aid headset

Z3 Pro instruction manual

Thank you for your trust and support!

In order to improve the user's experience and understanding of the

product, it is recommended that you read the instruction manual

carefully before using the product so that you can use it correctly.We

hope that the effect of our products can exceed your expectation.

Product parameters

Bluetooth version

Dual mode V5.0+EDR supports single/dual ear use

The auxiliary to

gain

Left ear 20~35 ± 1.5dB Right ear 20~35 ±

1.5dB

Battery capacity

Earphone 60 mAh Charging bin 500 mAh

Bluetooth distance

10 米

Music playback

time

The headset is fully charged for 12 ± 3 hours

Bluetooth talk time

The headset is fully charged for 12 ± 3 hours

Charging times of

charging bin

3 to 4 times in low power mode

Total endurance

Over 50 hours

Available standby

time

180 days (When not in use for a long time, charge

the device at least once every 180 days to extend

battery life)

Headphone full

0.5 hours

Summary of content (8 pages)

PAGE 1
Z3 Pro instruction manual Thank you for your trust and support! In order to improve the user's experience and understanding of the product, it is recommended that you read the instruction manual carefully before using the product so that you can use it correctly.We hope that the effect of our products can exceed your expectation. Product parameters Bluetooth version Dual mode V5.0+EDR supports single/dual ear use The auxiliary to Left ear 20~35 ± 1.
PAGE 2
charge time Charging time of 2 hours charging bin Schematic diagram of multi-function touch keys: touch The function keys
PAGE 3
Touch key function boot In shutdown state, long press the touch button for 3 seconds to start up, accompanied by a prompt tone To turn it off Under startup state, long press the touch button for 5 seconds to shut down, accompanied by a prompt sound (Please ignore the voice prompt in the middle) Auxiliary to Hold down the left/right earphone for 3 seconds to turn switch off/on the auxiliary listening (accompanied by the "Hearing off/" Hearing on" voice prompt).
PAGE 4
music Double click the left/right headset touch button Play/Pause music Triple click the left earphone touch button In a song music Triple click right headset touch button The next song Music volume None.
PAGE 5
automatically connected. The user enables the bluetooth function of the mobile phone to search or scan, and clicks the searched Bluetooth name "Z3 Pro". • Automatic Bluetooth connection 1. The headset has a Bluetooth memory function and will automatically connect to the last connected device. 2. After the bluetooth connection is successful, the connection will be disconnected when the distance with the connected device is beyond the effective distance.
PAGE 6
paired automatically when the headset is manually turned on again or removed after it is put into the charging bin. Charging operation • Use a standard TYPE-C USB cable to connect the type-C interface of the charging bin. The USB end can be connected to a universal 5V charger or computer USB interface.1A • The headset is automatically turned off and charged after being put back into the charging bin.The headset needs 0.
PAGE 7
charging bin and charge the headset automatically when it needs to be charged. 3. Do not use corrosive detergent to clean the product. 4. Do not heat the product or near the fire. 5. Do not place the product in fire. 6. Do not attempt to disassemble this product to make any modifications, as it does not contain any repair components. 7.
PAGE 8
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.