User's Manual

4. Connect the MINI USB terminal of the USB cord to the MINI USB port of the

GPS navigator and the standard USB terminal to the USB Host port of PC. Then,

the computer will recognize the navigator

5. After communication, unplug the MINI USB cable.

● MS ACTIVESYNC

1. Tap

in the setting interface to enter USB Option as shown below.

Select MASS ACTIVESYNC and tap

to save the setting.

2. Install the application Mobile Device in a drive of PC. Then the following icon

will appear in the drive selection.

3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the

GPS navigator and the standard USB terminal to the USB Host port of PC.

4. After the PC finds new hardware, double click the Mobile Device drive in the

selection area to enter the memory of GPS navigator for data transmission.