User's Manual

Chapter I Beginning Use
3
1.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before first use.
1.2.1 Power Supply
The GPS PF86-5001 can be powered by the built-in battery or external power
supply.
When the GPS navigator is unconnected to the charger, it is powered by the
Li-polymer battery. The battery capacity icon
in the system main
interface shows current residual battery capacity.
When the GPS navigator is connected to the charger, it is powered by external
power and the battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-polymer
battery. To avoid battery rupture, explosion, release of hazardous substance or
burn, do not unpack, pierce, strike on or discard the battery in fire or water.
1.2.2 Charge by DC Charger
The GPS navigator must be charged with the DC charger before first use.
Plug the USB terminal of the DC charger into the USB port of the GPS
navigator and the other to the power socket to supply power and charge the GPS
navigator.
[Note] The charging indicator light is red during charging. Do not unplug the
charge until the battery is fully charged and the indicator light turns green.
Please charge the GPS navigator when the battery is low or used up.