User's Manual

Chapter III Function Operation
41
To disconnect the navigator from PC and enter charging mode, you may
tap
.
5. After communication, unplug the Micro USB cable.
◆ MS ACTIVESYNC
1. Tap
in the setting interface to enter USB Option as shown below.
Select MASS ACTIVESYNC and tap
to save the setting.
2. Install the application Mobile Device in a drive of PC. Then the following
icon will appear in the drive selection.
3. Connect the Micro USB terminal of the USB cable to the Micro USB port of
the GPS navigator and the standard USB terminal to the USB Host port of PC.