User's Manual

Chapter I Beginning Use

1.2.3 Charge by Car Charger

Plug one terminal of the car charger into the USB port of the GPS navigator and

the other to the charging port to supply power and charge the GPS navigator.

[Note] To avoid damage due to current surge, plug in the car charger after the

automobile is started.

1.3 Basic Use

1.3.1 Power on/off & Sleep

1.3.1.1 Power on

Press the power key of the GPS navigator and let go after at least two seconds to

power it on.

[Note] Great humidity fluctuation may lead to short circuit of the GPS navigator.

Power on the navigator after it has accommodated to new environment.

1.3.1.2. Power off & Sleep

Press the power key and let go after at least two seconds to power off the GPS

navigator. The following interface will be prompted. If

is selected, the

navigator will automatically resume the state before entering sleep mode when it

is powered again.