User's Manual

Chapter VI Setting

To disconnect the navigator from PC and enter charging mode, you may tap

5. After communication, unplug the MINI USB cable.

6.9.2 MS ACTIVESYNC

1. Tap

in the setting interface to enter USB Option as shown below.

Select MASS ACTIVESYNC and tap

to save the setting.

2. Install the application Mobile Device in a drive of PC. Then the following icon will appear in

the drive selection.

3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the GPS navigator

and the standard USB terminal to the USB Host port of PC.

4. After the PC finds new hardware, double click the Mobile Device drive in the selection area to

enter the memory of GPS navigator for data transmission.

5. After transmission, unplug the USB cable.