User's Manual

Chapter VI Setting
24
Calibration Calibrate the screen when position deviation occurs.
System info
Display system information including ROM version, software version,
OEM version, platform ID and device ID.
FM Transmitter Transmits audio signals of the navigator to the radio set via frequency
modulation.
USB setting Set the data transmission mode between the navigator and computer.
Navigation path Select a navigation path for the navigator.
Factory Reset Reset the factory default settings.
6.2 Volume
Tap in the setting interface to enter the volume setting interface as shown below.
Close Exit the volume setting.
Vo lu m e
Ten volume grades (from mute to maximum)
available. Tap to decrease the volume by grade.
Sounds for taps Tap it to enable the function. Tap it again to disable
the function.
Power-on music Tap
or to select power-on music or disable
it.
6.3 Backlight
Backlight setting includes backlight brightness adjustment and latency of backlight off.
Tap in the setting interface to enter the backlight setting interface as shown below.