User's Manual

3 /
13
.
Buttons & Functions:
1:
Power button：Power on/off
2
：Return：On the media player screen and menu setting screen, return to the previous state.
3：Signal source ：Press this button to enter the signal source selection interface.
4
：Menu ：Press this button to enter the setting interface.
5：Down key：In the home screen/browser/menu, let the cursor move down.
6：OK：Confirm the selected item or mode.
7：Right key：In the home screen/browser/menu, move the cursor to the right.
8：Left key：In the home screen/browser/menu, move the cursor to the left.
9：Up key：In the home screen/browser/menu, let the cursor move up.
10：Keystone correction: When the upper and lower widths of the projected picture are
inconsistent, you can adjust the distorted picture by turning this button.
(Note: In order to make the left and right widths the same, the main body can be adjusted
by moving it in the left and right directions.)
11：Zoom adjustment: In the case of using or moving the unit for the first time, you can
use this switch to adjust the focus of the image.
12
：
IR
：Remote control signal receiver. Operate the remote control for the receiver and
projection screen of the main unit.
Remote control operation buttons and functions
1. Power button：Power on/off.
2. Menu：Display the setting menu screen.
3. OK：Confirm the selected item or mode.
4. Move left/ Back: In the home page/browser/menu, move the cursor to the left.
Back: back track the video or sound.
5. Move down/next file: In the home screen/browser/menu, move the cursor down.
Next file: skip to the next image/sound during playback.
6. Pause: control play/pause
7. Volume: adjust the volume of the speaker.
8. Source：Select the signal source.