User's Manual

11 /
13
.
2.3 The screencasting methods of different brands of Android phones are similar. Firstly, open the
screencasting device and connect the same screen device SSID. The following is a reference for the
operation method of the screencasting function of some brands of mobile phones:
3.DLNA
3.1 Open the IOS/Android device WIFI to find the SSID of the same screen device, click connect
(input password: 12345678), after connecting, open the device browser and enter the same screen
device IP address 192.168.49.1 in the address bar (the same as the IP displayed on the screen),
click Go.
3.2 After logging in, click Setting to enter the settings, select Airplay mode, Screen Mirroring mode
does not support push in some players (such as Youtube), click Submit after selection to confirm, the
same screen restarts, and then click the arrow in the upper left corner to return to the previous
level, select WiFi AP Then click Scan to scan for WiFi hotspots, select your router hotspot under
Scan Result and enter the password to connect.
3.3 After connecting to the router, the screen displays the router's WiFi hotspot and the IP address
assigned to the same screen device (different products and software display different information),
as shown in the figure:
3.4 IOS/Android device and the same screen device are connected to the same local area network
(router), open the video software (Youku, iQiyi, Tencent Video) to play the video, click the icon
with the word "TV" on the video to pop up "Searching for screencasting" "Device" interface, select
the SSID of the same screen device to start pushing on the searched device, and the phone enters the
interface that can control the playback, as shown in the figure:
Note: The router needs to be connected to the internet when using Youtube to play and push
3.5 After the push is successful, the mobile device can exit the screencasting interface to perform
other operations without affecting the video playback. To end the screencasting, click the close
button in the upper right corner of the screencasting interface. Different playback software
interfaces are different, and the operation methods are similar.
3.6 After the same screen device is connected to the router, the IOS/Android device can also choose
screen mirroring to project. The operation steps, the IOS device and the same screen device must be
connected to the same LAN