Users Manual

 
   










/T\KYZOMGZOUTUL)USSUT6XUHRKSY
3URPSW7RQH
&DXVHRI)DLOXUH
6ROXWLRQ
=NKTKXXUXUII[XJ[XOTM]UXQOTMG\UOIKVXUSVZ]ORRHKXKVUXZKJ
VRKGYKXKLKXZULURRU]OTMZGHRKZUYUR\KVXUHRKSY
Lifting Condition
The robot is not yet ready
Low battery
Low battery
Battery is too low,
will shut down soon
Charging problem
Main brush get tangle,
please clean main brush
Right wheel jammed,
please clean right wheel
Side brush jammed,
please clean side brush
Bumper sensors has been
blocked
Cliff detect sensor has been
blocked
Vacuum Motor jammed,
please clean it
The robot get stuck,
please remove the robot
The robot jammed,
please remove the robot
The laser head obscured
The laser head is stuck
Border sensor has been blocked
Robot suspended
Low Battery Reminder when robot in
no charge base area
Low Battery Reminder when robot in
no charge base area
Low Battery Reminder when robot in
no charge base area
Charging station problem
Roller Brush get tangle
Wheel Jammed
Side brush jammed
Bumper problem
Ground sensor problem
Vacuum motor jammed
The robot is stuck or the laser head is stuck
The robot jammed or the laser head is
obscured
Right border sensor is obscured
The laser head is stuck
The laser head is obscured
Please check the laser head is obscured
Please check the robot is stuck
Please check the sensor is obscured
Please check whether the robot jammed
or the laser head is obscured
Please check whether the robot is stuck
or the laser head is stuck
Please check whether the dust bin
enter is blocked
Please check whether the cliff sensor
get dirtied or be obscured
Please check whether the font bumper
can be bounced normally
Please check whether the side brushes is
twinned and clean up
Please check whether the wheel is
entangled and clean up
Please check whether the roller brush is
twinned and clean up
Please check whether the connection
between robot and charging pole pieces
connected well, or use adaptor to
charge directly.
Low Battery Reminder when robot in
no charge base area
Please charge the robot manually
Please charge the robot manually
Please check whether the font bumper
can be bounced normally, and
the sensors cleaned
Please put the robot back to the ground
and press the start button again.
Press button when ground or
collision detection is effective