Safety Instructions
Safety Instructions
Thank
you
for
purchasing
our
company's
laser
engraving
machine,
which
is
a
high-tech
product
integrating
light,
machine
and
electricity.
In
order
for
you
to
better
use
and
maintain
the
equipment,
please
read
the
instructions
carefully
andfollow
the
steps
in
the
instructions.
Hereby
Certify!
All losses caused by improper use
or
failure
to
follow
the steps in the manual shall be borne by the individual. The
final interpretation right
of
the
manual belongs
to
our
company, and
it
has
the right
to
modify all
the
materials,
data, technical details, etc. in this manual.
Safety
lnstruction
Before using the equipment, the user must read this operating manual carefully and strictly abide by the operating procedures.
Laser processing may be risky, users should carefully consider whether the processed object is suitable
for
laser processing
Processing objects and emissions should comply
with
local laws and regulations.
*This equipment uses
four
types
of
lasers (strong laser radiation), which may cause the following conditions:
CD
It
will
ignite
the
surrounding combustibles;
@ In
the
laser processing process,
other
radiation and toxic and harmful gases may be generated due
to
different
processing objects;
® The direct exposure
of
laser radiation can cause human injuries. The place
of
use
must be equipped with fire-fighting
equipment.
It
is
forbidden
to
stack flammable and explosive materials on the workbench and around
the
equipment. At
the same time,
it
is necessary
to
maintain good ventilation.
*The environment where the equipment
is
located should be dry, free
of
pollution, vibration, strong electricity, strong magnetism,
etc. Working environment temperature
5~30°C,
working environment humidity 35-65% (non-condensing water)
*The
working voltage
of
the
equipment:
AC100
-
240V.
*Only when the engraving machine and other related equipment have a safety grounding wire
can
it
be turned on and operated.
*When
the
equipment is turned on,
it
needs
to
be on
duty
throughout the whole process. The operator must
cut
off
all power
before leaving
to
prevent abnormal conditions.
If
any, please cut
off
the power immediately!
*It
is strictly forbidden
to
place any irrelevant
total
reflection
or
diffuse reflection objects in the equipment
to
prevent the
laser from being reflected on the human body
or
flammable objects.
V01
-
22
0704