Product Manual

10）Version: Firmware version information.

 USB mode

After booting, connect the USB cable to the computer, the tachograph will automatically pop up the USB

menu, the following options will appear:

Memory, in this mode can be video files or photo files access.

 WIFI mode

1. After turning on the camera, press and hold the key for 3 seconds without displaying the video. The LCD

displays the WIFI name (SSID) and WIFI password (PWA2).

2. Open the smart phone WIFI, search for devices in the WIFI network.

3. The first connection to enter the password (12345678).

4. To be the correct phone connection.

5. The connection is complete, and then run the application：RoadCam.

6. Connected to the WIFI, open the Nova Cam, you can view the camera's viewfinder screen from the phone

screen and control the camera taking pictures, videos, and from the camera memory card to download photos

and video files to the phone memory and other related operations.

7. Enter the RoadCam APP and click on the camera icon in Recorder mode to see the camera preview on the

phone screen, take photos / videos and download photos and video files from the tachograph memory card to

the phone memory operating.

8. Short press the OK button to turn off the WIFI.

Note：

1. APP no button to stop recording function (1. Switch to camera mode will automatically stop recording 2.

Browse video / photos will automatically stop recording 3. Exit APP, tachograph will automatically start

recording）.

2. The connection between the camera and the mobile phone is a one-to-one relationship. When connected to a

mobile phone, it can no longer be connected to other mobile phones. If you need to connect other mobile phones,

please disconnect the previously connected mobile phone and support Android 4.0 and IOS 10.0 or above phone.

3. WIFI mode mobile phone and the driving recorder the most suitable distance range is 5 meters.

Battery instructions

 Battery level indicator, please refer to the diagram：

Electricity sufficient Low power Low battery Not enough power

 There are three ways to charge the battery. The red charge indicator will be on during charging. The whole

charge time is about 180 minutes. The red charge indicator will turn off automatically after charging.

1：Use the power adapter to charge.

2：Use PC-USB to charge.

3：Charging with on-board power.

Note: When using this product due to improper operation caused by the crash, press the reset button, press the

power button to reboot, you can return to normal.