Owner's Guide

ManualsBrandsDongguan Timbretek electronic technology ManualsAudio EquipmentWireless earphone



SW03SportWirelessheadphones

Owner'sGuide



① BLUETOO THPAIRING

Singledeviceconnection

‐TurnBluetoothonyourdeviceandholddeviceneartheearphone.

‐Make sure the earphones isturned off then hold down themultifunction button for 5seconds,

theLEDlightwillflashblueandredtoletyouknowitisreadytopair.



‐GointotheBluetoothsettingsonyourdeviceandconnecttoL3

‐TheblueLEDlightwillflashtoshowthepairinghasbeensuccessful



FUNCTIONBUTTONS



②FUNCTIONANDOPERATION



Summary of content (4 pages)

PAGE 1
SW03 Sport Wireless headphones Owner's Guide ① BLUETOOTH PAIRING Single device connection ‐Turn Bluetooth on your deviceand hold device near theearphone. ‐Make sure the earphones isturned off then hold down themultifunction button for 5seconds, the LED light will flashblue and red to let you know it isready to pair.
PAGE 2
③L3 TECHNICAL PARAMETERS Brand name: Model name: Type style: Sport wireless headphones Bluetooth spec: 4.2 Driver size: Φ8mm Impedance: 16Ω Sound pressure level:97±3dB(1KHz1mWM) Frequency response: 20HZ‐20KHZ Rated input power: 3mw Maximum input power: 10mw Battery capacity: 80mA Talking time: 4H Transmission distance: 10M Charging time: 2.5H Bluetooth profiles: HSP V1.2, HFPV1.6, A2DP V1.3,AVRCP V1.5 Net weight: 14.
PAGE 3
⑤ENVOIRONMENTAL INFORMATION ⑥PRODUCT GUARANTEE 1. This warranty should be kept safe andcannot be replaced if lost 2. This warranty is valid for one year fromthe original sale date. 3. If your product becomes faulty duringthis time please contact the seller. Theproduct will be replaced if it is found thefault lies with them 4.
PAGE 4
5. If the product has been damaged byimmersion in liquid or dropping theproduct then it will not be replaced 6. A product will not be replacedwithout avalid warranty card 7.Tel:4008033291 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.