Installation Instructions

Connequ Anti-lost
Keyfinder Instruction
Setting up a new Keyfinder
1. Download and install from APP store or Google Play by search for “Connequ”.
2. Register the user name and password
3. Enable Bluetooth on your mobile phone
4. Press right upper corner “+” to setup product, setup “Connequ, battery pack, TSA lock”
5. Type a name of the device and choose “Connequ”
6. Start pairing with keyfinder. Keyfinder also need 3seconds press button to start pairing.
Using new Key Finder with Connequ APP
Cell Capacity
1. The cell capacity shows the CR2032 cell capacity in %.
Connection
1. The connection shows “DISCONNECTED” when the keyfinder disconnected with the phone.
2. The connection shows “CONNECTED” when the keyfinder connected with the phone.
Distance
1. Based on distance between phone and keyfinder, distance changed to “Very Close”,
“Close”, “Far”, “Very far” and blank when disconnection.
Phone alert
1. On the app, turn on the phone alert.
2. When connection was broken, the phone alert will alarm for 20 seconds.
Find me
1. On the app, press “FIND ME” and the keyfinder will alarm 20 seconds.
2. When press “ALARM OFF”, the keyfinder will stop alarm immediately.
Locate
1. On the app, press “LOCATE” and it will show the google map where the keyfinder last time
disconnected.