Electric fireplace manual MODEL:WU-32147-SN
! IMPORTANT INSTRUCTION When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before installing or using this heater. ․ To avoid malfunction, please be certain the input voltage of the electric fireplace insert and the voltage of the outlet are identical before plugging in. ․ Check the unit for any damage that may exist (such as missing screw, dents, etc.
․ This fireplace utilizes sparks and arcing in its internal operation. NEVER use this device in areas where gasoline, paint, or other flammable liquids are used or stored. ․ Always plug heaters directly into a wall outlet/receptacle; never use with an extension cord or relocatable power tap (outlet power strip) ․ NEVER burn wood or other materials of any kind in this fireplace. ․ Always use a licensed electrician for any maintenance to this device.
CHILD SAFETY WARNING Serious or fatal crushing injuries can occur from furniture tipover. To help prevent tipover: - Install tipover restraint provided. - Place heaviest items in the lower drawers. - Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product. - Never allow children to climb or hang on drawers, doors or shelves. - Never open more than one drawer at a time, if product applicable.
CAUTIONS: BATTERY INSTRUCTIONS ● Always purchase the correct size and grade of battery most suitable for the intended use. ● Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types. ● Clean the battery contacts and also those of the device prior to battery installation. ● Ensure the batteries are installed correctly with regard to polarity (+ and -).
OPERATING INSTRUCTIONS 《DOWN》Use in conjunction with the TIMER and HEATER modes. Controls the TIMER and THERMOSTAT settings. When in the TIMER mode, pressing the DOWN arrow will decrease the timer setting by 30 minutes each time the arrow is pressed (settings from 30 minutes to10 hours). Pressing the DOWN arrow will decrease the timer setting by 1 hour each time the arrow is pressed (settings from 10 hours to 12 hours).
Control Panel on fireplace insert Remote Control When L indicator is on, the heat is at low level. When L and H indicators are on, the heater is at high level. When indicator is on, the Bluetooth is paired. When indicators are off, heater stops and Bluetooth is not paired. Other Important Features ● Please be aware that when heater stops working, air will continue to blow for several seconds. This helps protect the internal wiring from overheating.
CARE AND MAINTENANCE ● Warning - Make sure the power has been turned off at the circuit breaker panel and that the heating element of the heater is cool before performing any maintenance on the fireplace. ● Dust the fireplace on a regular basis using a soft, lint-free cloth and a high-quality furniture polish. Always avoid "dry dusting" the fireplace as dust can scratch the wood finish. ● Avoid using soap/water to clean the fireplace.
