Getting Started Guide

this chapter explains how to use the barcode scanner when you
received it.
2.1 turn on the barcode scanner by press and hold the scan
buttons simultaneously for 2 seconds. if the barcode scanner
makes a di,di,di,di sound and the light goes out immediately
after turning it on,it means that the battery is insufficient,please
charge the battery immediately.otherwise, the battery is sufficient.
(we recommend that customers use our original charging cable to
charge the barcode scanner after receiving the product at the first
time)
2.2 after ensuring that the barcode scanner is fully charged and
turned on,please test whether the barcode scanner can scan the
barcode successfully.press the scan trigger and aim the device at
a barcode.when no device is connected. if the barcode scanner
makes a di,di sound,it means that the barcodes is reading
successfully.
2.3 press and hold the scan button of the barcode scanner for
about 8-10 seconds,until you hear a beep and see the blue light
flashing,then release the button.
2.4 navigate to the bluetooth setting on the smartphone or tablet
ensure that bluetooth is enabled on the smartphone or tablet and
searching for devices.
2.5 check the list of available bluetooth devices on your
smartphone or tablet .from the list select barcode bluetooth hid
listed to pair.
2.6 run notepad on smartphone or tablet,put the cursor in the
blank field.when you use the barcode scanner to scan the
barcode.you willsee that the barcode will be uploaded to the
location of the cursor.
02