Getting Started Guide

22
Storage Mode
Medium Very Low
If the transfer range beyond bluetooth transfer range,storage
mode is suggested,in which scans are stored in intermal
storage after being scanned.
In storage mode,if a barcode is scanned,the scanner will make
a short tone and the scanned data are automatically stored in
the scanner’s internal storage.if the internal storage is full,the
scanner will emit three low-frequency short tones to alarm.
To convert scanner from “Normal Mode” to “storage Mode”,
scan the following barcode “Storage Mode”
Upload the stored data by scanning the “Data Upload”
barcode,After the data is uploaded,the barcode stored
in the barcode scanner won’t be automatically deleted.
the user can upload the stored data multiple times by
scanning the “Data Upload” barcode.
Storage Mode