Getting Started Guide

20
9.2 2.4G Wireless Pairing
A:Start the scanner and scan the “2.4G wireless Pairing Mode”
2.4G Wireless Pairing Mode
B.Scan “Match the Receiver” so that enter into pairing state
Match the Receiver
C.Plug the usb dongle receiver to the computer.if pair
successfully,you will hear a beep.the blue light on the top will
always on.
D. Run microsoft word or notepad on computer,put the cursor in
the blank field. when you use the barcode scanner to scan the
barcode,you will see that barcode will be uploaded to the
location of the cursor.