Getting Started Guide

19
B.Launch the SPP-enabled application you wish to connect to.
Navigate to the connection/device manager for the SPP-enbled
application.Pair your scanner directly to the application
(bypassing the host device’s bluetooth setting)
C.Put the cursor on the position where you need to input in your
software.when you use the barcode scanner to scan the barcodes
you will see that barcode will be uploaded to the location of
the cursor.
How To Pair In Bluetooth BLE Mode
A.Start the scanner and scan the “bluetooth BLE pairing mode”
and enter the bluetooth search mode.you will see the blue light
flashing.
Bluetooth BLE Pairing Mode
B.Launch the BLE-enbled application you wish to connect to.
navigate to the connection/device manager for the BLE-
enabled application.pair your scanner directly to the application
(bypassing the host device’s bluetooth setting)
C.Put the curor on the position where you need to input in your
software.when you use the barcode scanner to scan the barcode,
you will see that the barcode will be uploaded to the location of
the cursor.