Getting Started Guide

Method 1:
Method 2:
How To Pair In Bluetooth Hid Mode
17
A. Press and hold the scan button of the barcode scanner for
about 8-10seconds,until you hear a beep and see the blue light
flashing,then release the button
B. Navigate to the bluetooth setting on the smartphone or tablet.
ensure that bluetooth is enabled on the smartphone or tablet
and searching for devices.
C. Check the list of available bluetooth devices on your
smartphone or tablet. from the list,select device to pair
D. Run notepad on a smartphone or tablet,put the cursor in the
blank field. when you use the barcode scanner to scan the
barcode,you will see that the barcode will be uploaded to the
location of the cursor.
A.Start the scanner and scan the “bluetooth HID pairing mode”
and enter the bluetooth search mode.you will see the blue light
flashing.