User's Manual

Flight Path preparation
! Use Vimdrones Designer to design the Flight path, save the .blend file and export the
data
! Usage Warming
o Do not let the drone collide when design the Flight path. The distance
between drones should need more than 2m
o Do not let the drone exceed the speed limit when design the Flight path. Max
Vertical Ascent Speed (Up To) is 5m/s, Max Vertical Descent Speed (Up To) is
3m/s, Max Horizontal Speed (Up To) is 4m/s. It is recommended that the
flying speed of the drone is about 2m/s on average
o Do not let the drone beyond the fence when design the Flight path
6. Pre-Flight Setup Procedure
! Power the WIFI router, connect the WIFI router and PoE power supply with a network
cable
! Place the tripod, setup the RTK Base and the antenna, use the Feeder to connect the
RTK Base and the antenna
! Connect the RTK Base to PoE power supply with a network cable (so the WIFI router
can communicate with the RTK base)
! Power the RTK Base through the PoE power supply
! Power the radio transmitter
! Place and locate drones, the distance between each drone no less than 2 m,