User's Manual

Get Quick Start
Please remove the protection strip and film on bumper.
Please install the side brushes at first use, align side brush and fixed shaft and then press them.
Position The Charging station
Install the charging station on the flat ground firmly and against the vertical wall (fixed on the wall
without hollow area). Please remove objects within 0.5m of the left and right side and at least 1.0m
of the front of the charging station. If you can not remove the objects, check whether LiDAR robot
cleaner can return to the docking station normally; If not, contact the customer service ask for help.
Charge your LiDAR Robot Vacuum Cleaner
➢ Robot vacuum cleaner has a pre-installed rechargeable Li-ion battery that has to be fully
charged before use.
➢ The Robot will automatically return to the Charging station at the end of cleaning task or when
its battery is running lower than 20%.
Method 1: Press the Charging button on remote controller to send the Robot to the Charging station.