User's Manual

Firmware update
Update the robot using the app. Place the robot on the charging dock and ensure that the battery
level is higher than 20% before updating. The power indicator will flash white quickly during a
firmware update.
Storage the Robot
If the robot is to be left unused for an extended period, turn it off before storage and charge it at least
once every 3 months to avoid battery damage resulting from over-discharging.
LED Status indicator
LED indicator
Status
Green
Standby
During in charging will bink white, switch to solid green after fully charged
Charging
Solid Green
Working
Solid green once finished thefirmware updated
Firmware updating
⚠ Attention:
⚫ Please DO NOT forget to take out the battery before discarding the Robot.
⚫ Please turn off the power switch before taking out the battery from the Robot .
⚫ Please DO NOT place the battery in High-temperature environment above 45℃or in the
water. ⚫ Please DO NOT exert external force to the battery or drop them from heigh.
⚫ The battery should be recycled with safe disposal. Please DO NOT discard it freely or
throw it into fire for fear of explosion!
⚫ If the battery has leakage, avoid the liquid to skin or clothes, use dry mop to clean it
⚫ touched and send the battery to recycle bin or mainteance service.
Press power button and hold 3 seconds to turn off