User's Manual

4.Remove the side brushes and cleaning it with cleaning tool
Cleaning the Charging electrode,Charging pin, driving wheels and universal wheel
1.Dry wipe to clean the charging electrode and charging pins
2.Cleaning the driving wheels and universal wheel with cleaning tool
Relacement the battery
Battery relacement of Robot
➢ Release the screw with the screw-driver, open its base plate and then take out the battery.
➢ Please place the positive and negative electrode correctly for new replacement battery.
➢ Please set the Robot in charging state to keep the best of the battery while the Robot is unused.
Battery relacement of Robot
➢ Open the battery cover and then replace the battery.
➢ Please place the battery with correct polarity(+/-).
➢ Please take out the battery if it was unused for long time.
⚠ Attention:
⚫ DO NOT cleaning the wheels with water.