User's Manual

➢ When the mopping pad is removed, the system automatically exits mopping mode without
water release mode without water release.
Use your Robot with Amazon Alexa & Google Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables you to control
Robot with your voice ( currently support English voice only).
Before you start, please make sure that:
➢ Robot is attached to the Charging station to ensure there is enough power.
➢ Robot is connected with the Tuya App.
➢ You have an Alexa-enabled device ( Such as Amazon Echo, Echo Dot or Echo Spot) or a
device enabled with the Google Assistant (Such as Google Home, Google Home Mini). These
devices are sold separately by other supplier.
➢ The Amazon Alexa app or Google Home app is already installed on your smart device, and you
have created an account.
To control Robot with Alexa or the Google Assistant
➢ Open the Robot App on Tuya and tap the “ “ icon on the top right.
➢ Find the “Third-party Control section and follow the on-screen instruction to complete the setup.
Reset the System
You can reset the system if there is no any response when pressing any button on Robot, Remote or
Apps.
➢ Make sure Robot is not on the Charging station.
➢ Press and hold on the “Reset” button,Robot will automatically turn off.
➢ Put back the Robot onto the Charging station or press and hold on power button to turn it on.
⚠ Attention:
⚫ DO NOT use any other cleaning solution other than water. Cleaning solutions, even natural
ones, can clog the water release system and break down the materials inside the device.
⚫ To add water into the water tank or install the mopping module, pause the cleaning first. DO
NOT manually move the device.
⚫ Although water release is stopped when cleaning is paused, the mopping cloth will still be wet.Be
careful not to keep Robot in one location for too long.
⚠ Attention:
⚫ After resetting the system, Robot may lose its map and the original settings including the forbid
areas or virtual walls.