User's Manual

6.Select Room Cleaning
Select specific rooms for cleaning in the app. In this mode,the Robot will only clean the selected
rooms.
7.Select a Suction Power Level
In the app, find setting section to select a suction power level according to your needs:
➢ Strong
➢ Normal (Default)
➢ Gentle
➢ Auto
Use Mopping System
8. Select a cleaning mode to start mopping.
Robot automatically sweeps and mops in the selected mode.
You can also select the mopping water level (3 levels) in the app according to your needs (in setting
section on Tuya App).
➢ High
➢ Middle ( Default)
➢ Low
⚠ Attention:
⚫ The mopping mode is only intended for a clean floor without stubborn stains or liquids.
⚫ To achieve a better mopping effect, it is recommended to clean the floor with Robot 3 times
before installing the mopping module.
⚫ To avoid staining floors, do not use the mopping function when dust is mixed with liquids such
as coffee or ink.
⚫ Mopping System cleans best on smooth hard surfaces and may not perform so well on uneven
tiles, heavily waxed floors or rough surfaces like slate or brick, which may snag the cleaning
pad.
⚫ The mopping mode is not recommended when no one is at home.
⚫ Do not use the mopping mode on a carpeted floor. It is recommended to adding “Mop forbid
area” in the app on “Forbiden Edit” to avoid cleaning the carpeted area.