User's Manual

The cleaning paths are planned along the walls, following a bow-shaped cleaning method
to complete the cleaning of each zone one by one.
Real-time Mapping & Floor plan
Real-time mapping helps you know the cleaning path and environment easily. A floor plan will be
built after cleaning. The map will be updated real-time during each cleaning to ensure normal
navigation.
To create a complete floor plan:
➢ Open your doors for Robot to map each room;
➢ Remove any objects that may be in the way or get Robot stuck.
Note:
Do not remove the Charging station after a floor plan is created.
2.Stand by mode
If the robot is paused for over 10 minutes, it will switch off to stand by mode, and its power indicator
will light off. Press” ” button to wake it back up.
Note:
The robot will not switch off to stand by mode when it is on the charging station.
3.Spot Cleaning
➢ In Standby or Pause mode, press the” ”button on remote or press “Pose” on Tuya App to
start intensively cleans a specific area with a size of 1.5 m x 1.5 m.
➢ Useful if there is a concentrated area of dust or debris. When the cleaning of a certain zone is
finished, it automatically returns to the Charging station.