Stage SingFree Karaoke Microphone System User Manual
SPECIFICATION Model Stage SingFree Output Wattage RMS：7.5W MAX: 10W Power Supply 3.7V / 2500mAh Frequency Response 50 Hz - 20k Hz 52mm Driver Diameter Microphone Capsule 9.7mm Condenser Mic USB Charging Type-C 5V/1A Charging Time 3 Hours Battery Life 5 Hours (Max Volume) 10 Hours (Half Volume) Dimension 7.9x2.8x2.6 inch / 20x7x6.5cm Weight 0.73lb / 0.
DIAGRAM 1 3 5 7 3 8 9 10 11 2 4 4 5 6 6 7 12 1 RGB Lights 2 VOL+ Button 3 Power ON/OFF; Music/MIC Volume Switch Button 4 VOL- Button 5 Sound Effects Button 6 Voice Cancelling/Back Button 7 Bluetooth / TWS Button 8 3.5mm Headphones Port 9 3.5mm Aux-in Port 10 Type-C Charging Port 11 Lighting Switch Button 12 Type-C Charging Cable 13 3.
MAIN FUNCTION 1. Bluetooth speaker for audio output. 2. Karaoke singing & voice recording. 3. Bedside lamp for sleeping atmosphere. CHARGING The status of the red indicator on power button: On: Charging Off: Fully charged Flash: Low battery≤5% NOTE: 1. Please charge with power bank, computer USB port or power adapter (type: 5V 1A). 2. Do not charge in a sub-zero environment, charging below zero may cause damage to the battery. 3.
OPERATING INSTRUCTION Button Operation Function Short press Volume up Long press for 2s Short press Long press for 2s Short press Long press for 2s Short press Switch Music volume/Karaoke volume Power ON/OFF Volume down Next track Switch sound effects Long press for 2s Suppress the vocal in music Long press for 2s/ short press again Restore the vocal in music Short press Long press for 3s Short press Long press for 2s NOTE: Previous track Disconnect the paired Bluetooth device Get into TWS mod
AUX MODE 23 3 1 1 How it works: 1. Insert the AUX cable and 3.5mm headphones to connect SingFree with your device. 2. Power on the microphone. 3. Turn on the karaoke / music applications on your device and start your singing or recording. NOTE: 1.The AUX Mode is for voice recording, and supports original sound effect only. 2.The audio won't play through the microphone, please insert the 3.5mm headphones as well. 3.Unplug the AUX cable, the microphone will change to Bluetooth Mode automatically.
BLUETOOTH MODE 11 22 How it works: 1.Power on the microphone. 2.Search "SingFree" from your device and click to connect. 3.Turn on the karaoke / music applications on your device and start your singing or recording. NOTE: 1.How to connect two SingFree microphones with your device: 1) Connect the first microphone as above, then long press the Bluetooth button for 3 seconds to search for connection. 2) Power on the second microphone, both now are in TWS mode and ready to connect.
HEADPHONE MODE 2 1 3 How it works: 1. Power on the microphone and connect it with your device via Bluetooth. 2. Insert the 3.5mm headphones to the headphones port. 3.Turn on the karaoke / music applications on your device and start your singing or recording. NOTE: 1.The Headphone Mode only supports original sound effect. 2.The audio and your singing will play through the headphones instead of microphone in this mode.
FM / PARTY MODE 1 2 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
