User's Manual

to the actual need.Minimum 10 minutes (others keep default 30 minutes), maximum 100 minutes.
Click on the upper right corner
icon withdraw from，as show below:
(Setting the main interface) (Upload interval setting)
10. Unit setting
Click Uints Setting, and the user sets the unit according to the actual needs, as shown below:
Each data unit is displayed in the first unit value as the default unit of the system,users are free to
choose units according to their needs.
Click on the upper left corner
Icon exit, as show below:
(set up the main interface) (unit setup)
11. Alarm setting:
Click Alarm Setting The user sets the upper and lower limits according to the range of design
parameters .For example, temperature ：0℃～60℃ (32℉～140℉)。After the alarm value is set，click the
upper right save icon to exit, as shown below：