User Manual for IOT devices Part 1 - Installation (STD01) Check Items before Installation 1. Power off the break 2. Light bulbs are dimmable (If not sure, send us the brand and model of it) 3. Make sure there is a neutral wire for the master switch. If not, the switches cannot work properly. It is in white and NOT used by your old switch. You can send us photos of the wires for both 3-way switches. Email: martinjerry01@outlook.
User Manual for IOT devices Part 1 - Installation (STD01) FQA: 1. How can I know it is connected correctly? A: Press the on/off button, dim button on both Master and Add-On switch. They should work properly. Indicator lights on the Master Switch can show the brightness of light bulbs. 2. After installing the Add-On switch, I see all indicator lights flash on the Mater Switch. What’s wrong? A: This means the TRA-1 and TRA-2 are reversed. Just check and change them back. 3.
User Manual for IOT devices Part 1 - Installation (STD01) Now Wire the two switches according to the diagram below: Tips: Wires on your old switches are: st 1 Switch: Live, TRA1, TRA2 nd 2 Switch: Load, TRA1, TRA2 TRA-1 & TRA-2 is very easy to identify. Generally 1red, 1black. They come from the same location and both connect to the old switch. Neutral wires are not used by your old switch. Recommended Connection procedures 1. Master Switch 1.1. Connect Ground Wire (Copper or Green.
Part 2 - Download Smart Life App Step 1: Download the App Scan the QR code or search “Smart life” in the App Store or Google Play iPhone: https://itunes.apple.com/us/app/smart-life-smart-living/id1115101477?mt=8 Android: https://play.google.com/store/apps/details?id=com.tuya.
User Manual for IOT devices Part 2 - Download Smart Life App Step 2: Register a New Account 3 4 Password must contain 5 Register with phone number or email address 6-20 letters and numbers 6
Part 3 - Wi-Fi Connection READ HERE!!! 1. Confirm that both the Master and Add-on Switch work well manually (ON/OFF, Dim). If not, go back to the wiring part. 2. 2.4G WiFi is available. NOT support 5G (802.11av) Step 1: Set the Switch to Easy Pairing Mode 1. Press the tiny restart button under the main power button to restart the switch. You will see the indicator is in constant RED. 2. Press and hold the power button for 5-8s until the indicator blinks quickly in RED.
User Manual for IOT devices Part 3 - Wi-Fi Connection Step 2: Pair the switch on App 1. Confirm that you have downloaded the right Smart Life App (Same Logo as the right side) If not, download it from the links iPhone: https://itunes.apple.com/us/app/smart-life-smart-living/id1115101477?mt=8 Android: https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_US 1.”+” 2. All devices 3.
User Manual for IOT devices Part 3 - Wi-Fi Connection QA: Q1: I follow all of the process above, but cannot get the switch connect to the WiFi (2.4G). Any suggestions? A: Please try our AP mode, which is more compatible. If the AP mode fails again, send your App account id to martinjerry01@outlook.com .Our Engineers will check and reply you within 12h. How to Access AP mode? 1. Press the tiny restart button under the main power button to restart the switch. You will see the indicator is in constant RED. 2.
User Manual for IOT devices Part 4 - Alexa & Google Home READ HERE!!! 3. It can be controlled by App well when your smart phone is under 3G/4G status (NOT Wi-Fi). If not, check your Wi-Fi router connects to the Internet and pair the switch again. Send us your device virtual id (find in the App) if necessary. Email: martinjerry01@outlook.com Part 4.
User Manual for IOT devices Part 4 - Alexa & Google Home Step 3: Enable the skill Step 4: Login the account you registered on the App in Part 2, then click “Link Now” The account and password MUST the same that you registered in the smart life app (Email or Tel) DO NOT input your Alexa account or use another account Step 5: The Account is linked successfully, and then Step 6: Congratulations! Alexa Devices (Echo) can tap Authorize to Complete. control the switch ON/OFF.
User Manual for IOT devices Part 4 - Alexa & Google Home http://www.martinjerry.com/std01support If you want to delete or add new switches, please delete or add them in the Smart Life App, the Alexa will synchronize automatically. If you cannot see the name of switches in the Devices List in Alexa Page, you can click “Discover” in Alexa Page, it will synchronize from the Smart Life App.
User Manual for IOT devices Part 4 - Alexa & Google Home Part 4.2: Connect your Smart Switch to Google Home Step 1: Find "Home Control" in the hamburger menu on the Google Home app’s home page -> Home Control -> then tap "+". Step 2: Find "Smart Life" in the list. Step 3: Input your Smart Life account and password you registered in Part 2, then tap "Link Now".
User Manual for IOT devices Part 4 - Alexa & Google Home Step 4: After you assign rooms for devices, your devices will be listed in the Home Control page. Step 5: Control your smart devices through Google Home Now you can control your smart devices through Google Home. If you set the switch name as “bedroom light”, the supported voice commands are as below: Ok Google, turn on bedroom light. Ok Google, turn off bedroom light. http://www.martinjerry.
User Manual for IOT devices FCC Compliance Notice FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
