Instruction Manual

Way of Wearing
Way of Operating
1. Before Use:
First of all, you should wet the skin of cervical vertebra with a wet towel, then put the product on the neck,
and adjust the position of the product, making the electrode close to the skin of cervical vertebra.
2. Starting up:
In the shutdown state, if
you press and hold the switch button for 3 seconds, the indicator light will light up, and the buzzer will sound
according to the current battery level (see item 5, battery indicator), prompting to turn on. After starting up
, it automatically enters the waiting state (that is, no EMS output, no heating output).
3. Shutdown:
In the power-on state, if you press and hold the switch button for 3 seconds, the indicator light will
go out, and the buzzer will beep once, prompting to shut down.
4. Charging:
Connect the Micro USB charger and
the indicator light shows the breathing state, indicating that it is charging. After charging is completed, the i
ndicator light is always on. (Note: For safety reasons, the product is not allowed to be used after it is connec
ted to the charger. When the massager is
charging in the off state, pressing the switch button cannot be turned on; when the charger is connected in t
he on state, the use will be automatically restricted. After removing the charger, it automatically shut down.)
Steps to replace the battery:
① Use a flat-blade screwdriver to pry the upper cover from the back of the
remote control.
②
Take out the PCB board from the lower cover, and push the battery out
of the front of the PCB board in the direction of the arrow to replace it.
Hot Compress
Button
Mode Button
Strengthen the
Intensity
Lessen the
Intensity