User's Manual

ManualsBrandsDongGuan Lanye Electronics Tech ManualsAudio EquipmentWireless Headset

Ⅰ、LED Indicator Description

Power On

Pairing Status

Paired Successfully

Play Status

Power Off

Wired Mode Status

Battery Low

Charging Status

Blue light on for 3 seconds

Red and blue lights flash alternately

Blue light flashes every 5 seconds

Red and blue light flashes alternately three times

No light

Red light flashes every 5 seconds

Red light is always on, and turns off when fully charged

User Manual

LED indicator light

BL100

Summary of content (5 pages)

PAGE 1
BL100 User Manual 2 1 4 3 5 7 LED indicator light 8 6 Ⅰ、LED Indicator Description Power On Blue light on for 3 seconds Pairing Status Red and blue lights flash alternately Paired Successfully Blue light flashes every 5 seconds Play Status Blue light flashes every 5 seconds Power Off Red and blue light flashes alternately three times Wired Mode Status No light Battery Low Red light flashes every 5 seconds Charging Status Red light is always on, and turns off when fully charged 1
PAGE 2
Ⅱ、Button Function Description 1、 Function description of power key a、In the power-off state, press and hold this key for 3 seconds, LED indicator will change from blue light always on to red and blue flashing alternately, and the headset will enter the pairing mode; turn on the Bluetooth on your device, search for the device name: BL100 , click the device name to enter the connection, after connecting successfully, the LED indicator turns blue, and flashes once every 5 seconds; b、After connecting the Blueto
PAGE 3
Charging Voltage DC5V Working Voltage 3.7V Working Time >24 hours Standby Time >1500 hours Ⅶ、Cautions a、Use a 5V 1A/5V 2A charger to charge the headset.
PAGE 4
Product Certificate After inspection, the product meets the technical standards and is allowed to leave the factory. QC S S PA 0 tes t1 Ⅷ、Contact us Please contact us if you have any questions related to the use, maintenance and safety of your headset, or if you experience a bug/failure with your device. Our professional after-sales maintenance personnel will assist you to solve your problems.
PAGE 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.