User's Manual

规格 50x55mm 105克铜版纸
Power Key: Press and hold for 2 seconds to
power on/off.
Play / Pause : Short press to pause / play music.
Bluetooth connected:
Short press twice to disconnect.Short press again
to reconnect last-paired device.
Bluetooth hands-free function:
Short press to answer the phone / hang up.Press and
hold to reject the call.
Turn on the speaker:Turn on bluetooth search
function on your smartphone or other device,find
the bluetooth device“HPSS10BTSpeaker” and
connect it.
When used next time,the speaker will reconnect
the last paired device automatically once your
device’s bluetooth is turned on.
HPSS10 BLUETOOTH SPEAKER
Version1.0：September 2019
XXXXXXXXXXXXX
Copyright 2019 HP Development Company,L.P.
Printed in China
Product introduction Specification
Technical Parameters
Power supply:Built-in 500mAh lithium battery
Charging time:DC5V-500mA around 2 hous
Playtime:4+ hours at Mid-volume
Speaker system:1.5 inch interial magnetic trumpet
Output power:3W THD=1%
Frequency response:120Hz-20KHz
Bluetooth vertion:Bluetooth 4.2
External interface:MICRO USB port
Dimension
Product net weight:116g
（including built-in lithium battery）
Product size:W56×D56×H35(mm)
Keys Functions
Charging:
Charge with a DC5V-500mA or higher USB adaptor.
Built-in LED Indicator:
Light stays on while charging.
When fully charged,light goes off.
Ports Function Bluetooth Connection
Packing Content
1.Bluetooth speaker 1PC
2.User Manual 1PC
3.USB Cable 1PC
1. Bluetooth 5.0 solution, low power and high
transmission, support multiple protocols
2. The body is made of one-piece aluminum
3. Support TWS connected stereo playback
4. Support Bluetooth hands-free calling
5. Mini compact body, accompanied by music anytime,
anywhere
6. Set a button and charging interface at the
bottom of the speaker, simple and efficient
1) The TWS system only supports two speakers.
2) Once two speakers paired,they will remember their
acting of main and sub speakers and will reconnect
automatically next time.
3) When TWS paired successfully,operate any one of the
speakers and the other will have the same operation
simultaneously.
Main Speaker
Sub-speaker
TWS Wireless Stereo Function
TWS Connection
Turn on two speakers and make sure neither of them
is paired with device.Choose any one of them and short
press power key twice,you will hear “DongDong” sound
while pairing(act as main speaker).After “DongDong”
sound,the TWS system is set up successfully .
Read manual before product use in order to help you comply
with the warranty and extend the life of the product.
● Keep the product dry, do not place the product in a damp
place, so as not to affect the internal circuit of the
product;
● Avoid using this product during intense exercise or
sweating to prevent sweat from penetrating into the product
and damaging it.
● Do not place the product in a place exposed to the sun or
high temperatures. High temperatures will shorten the life of
electronic components, damage to the battery and deformation
of some plastic parts.
● Do not place the product in a cold place to avoid damaging
the internal circuit board.
● Do not attempt to disassemble the product. If you are not a
professional guy, otherwise you may damage the product.
● Do not drop, strongly vibrate, or hit the product with
hardware to avoid damaging internal circuits.
● Do not use harsh chemicals or detergents to clean the
speaker.
● Do not use sharp objects on the surface of the product to
avoid damage to the outer casing and affect the appearance. If
the product is not working properly, please send it to the
qualified service organization.
Care and Maintenance
1、To ensure your personal safety, do not place the speaker
too close to the pacemaker (less than 10CM).
2、Do not plug the adaptor into a power outlet.
3、This is not a Children’s toy, children should use this
product under the supervision of an adult.
4、It may damage your hearing if you use the speaker at high
volume and with long time.
Important Safety Information
Model:SS10
Rating:DC5V/500 mA
Battery:Lithium polymer battery
Warning
1.If the battery is not properly replaced, there is a danger
of explosion and it can only be replaced with a battery of
the same type or equivalent one.
2.The battery must not be exposed to sunlight, fire, or
similar overheating conditions.
3.Consumers who use the power adapter to charge should buy a
power adapter that is CCC certified and meet the standard
requirements.
QC PASS
CMIIT ID:XXXXXXXX
Printed in China
Disposal of waste equipment in private homes by users in
EU countries
The inclusion of this symbol on the product or packaging
indicates that this product must not be disposed of as
general household waste. Moreover, it is your
responsibility to send the discarded equipment to the
designated waste electrical and electronic equipment
collection point. The collection and recycling of such
waste equipment helps to conserve natural resources and
benefit human health. For more information about recycling
your waste equipment, contact your local city office, your
household waste disposal station, or the shop where you
purchased the product.
5.0
Bluetooth
CMIIT ID:XXXXXXXX
Model number:SS10 Bluetooth Speaker，Model:SS10
Restricted substances and their chemical symbols
单元Ｕnit
PCB board
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
Shell
Cable
Accessary
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr+6)
Polybrominate
d biphenyls
(PBB)
Polybrominate
d diphenyl ethers
(PBDE)
Remark 1: 〝 Exceeds 0.1wt% 〞 and 〝 exceeds 0.01 wt% 〞 means that the percentage
of the restricted
substance exceeds the percentage content reference value.
Remark 2 : 〝○〞 means that the percentage of the restricted substance does not exceed
the percentage content reference value.
Remark 3. 〝-〞 means that the restricted substance is an exclusion item.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help. The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction
FCC ID: 2AUPZ-HPSS10