User's Manual

HP S10 Pro Bluetooth Speaker
USER MANUAL
Version 1.0：September 2019
Parameter data
Introduction
Packing details
Buttons'function Ports'function indicator
Bluetooth connecting
XXXXXXXXXXXXX
Copyright 2019 HP Development Company,L.P.
Printed in China
1.HP S10 Pro Speaker *1
2.Micro USB Charging *1
3.3.5MM Audio cable 1pc *1
4.Lanyard *1
5.User manual *1
6.Warranty Card *1
1.Bluetooth 5.0
2.Wireless Bluetooth music playback and hands-free calls
3.TWS technology
4.TWS technology supported to make the sound stereo.
5.Supports up to 32 GB Micro-SD card.
6.Supports FLAC、APE、MP3、WMA、WAV audio file.
7.Aux-in jack and 3.5mm audio cable
1.Model：HP S10 Pro
2.Micro SD card ：Support no more than 32G
3.Power Supply：Built-in 3000mAh Li-ion battery
4.Charging time：DC5V-1A USB adapter,Charging time is about 5 hours
5.Trumpet: 2x60mm Internal magnetic horn
6.Output ：8W
7.Frequency Response：150Hz-8KHz
8.BT verion ：Bluetooth 5.0
9.USB：USB2.0,compatible USB 1.1
10.Product Size：208×95×90mm
11.Product weight：645g（Including built-in Lithium battery）
1. Power on
Long Press and hold "power key" 2s, with voice prompt ring Bluetooth LED
flickering, waiting to connect.
2. Bluetooth connect
Go to device's Bluetooth page, find and connect the pairing name: HP S10
Pro BT Speaker With a voice" dong dong ding" and the Blue LED stays.
Can connect HP S10 Pro BT Speaker automatically once open the device's
Blutooth function in next use.
Aux In
Connect Audio cable,voice
prompt ring shift to Aux In
mode automatically
Four levels power
indicator light
Charging port
Connect DC 5V-1A or above adapter
or use PC USB port to charge
Date access
Insert Micro SD card when power off, Use date cable connect
to PC, press and hold "Power Key"enter SD Card mode, then
can copy music files on Micro SD card.
Micro SD play
Insert Micro SD under power
on status with voice prompt:
"ding ding", then it can play
songs on Micro SD card
Bluetooth disconnect
Long Press and " "at the same time can disconnect current
device, and E8 goes to discoverable status;
If short press "power key"can reconnect last Bluetooth device
Care and Maintenance
Important Safety Information
Read manual before product use in order to help you comply with the
warranty and extend the life of the product.
● Keep the product dry, do not place the product in a damp place, so as
not to affect the internal circuit of the product;
● Avoid using this product during intense exercise or sweating to
prevent sweat from penetrating into the product and damaging it.
● Do not place the product in a place exposed to the sun or high
temperatures. High temperatures will shorten the life of electronic
components, damage to the battery and deformation of some plastic parts.
● Do not place the product in a cold place to avoid damaging the
internal circuit board.
● Do not attempt to disassemble the product. If you are not a profes-
sional guy, otherwise you may damage the product.
● Do not drop, strongly vibrate, or hit the product with hardware to
avoid damaging internal circuits.
● Do not use harsh chemicals or detergents to clean the speaker.
● Do not use sharp objects on the surface of the product to avoid damage
to the outer casing and affect the appearance. If the product is not
working properly, please send it to the qualified service organization.
1、To ensure your personal safety, do not place the speaker too close to
the pacemaker (less than 10CM).
2、Do not plug the adaptor into a power outlet.
3、This is not a Children’s toy, children should use this product under
the supervision of an adult.
4、It may damage your hearing if you use the speaker at high volume and with
long time.
5、A sharp sound may be heard when operating a hi-fi speaker switch or
when plugging into a speaker, it may affect your hearing at high volume.
Therefore, it is better turning down the volume to the minimum before
switching between various sources or inserting earphone.
6、For your safety, please do not use speaker when you driving and
riding a bicycle.
Model:HP S10 Pro
Rating:3.7V /1000 mA
Battery:Lithium polymer battery
Precautions
1:If the battery is not properly replaced, there is a danger of explosion and
it can only be replaced with a battery of the same type or equivalent one.
2.The battery must not be exposed to sunlight, fire, or similar
overheating conditions.
3.Consumers who use the power adapter to charge should buy a power
adapter that is CCC certified and meet the standard requirements.
QC PASS
CMIIT ID:XXXXXXXX
Printed in China
Model number : HP S10 Pro Bluetooth Speaker Model: HP S10 Pro
Restricted substances and their chemical symbols
Ｕnit
PCB board
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
Shell
Cable
Accessary
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr+6)
Polybrominate
d biphenyls
(PBB)
Polybrominate
d diphenyl ethers
(PBDE)
Remark 1: 〝 Exceeds 0.1wt% 〞 and 〝 exceeds 0.01 wt% 〞 means that the percentage of the restricted
substance exceeds the percentage content reference value.
Remark 2 : 〝○〞 means that the percentage of the restricted substance does not exceed the percentage
content reference value.
Remark 3. 〝-〞 means that the restricted substance is an exclusion item.
5.0
Bluetooth
CMIIT ID:XXXXXXXX
Disposal of waste equipment in private homes by users in EU countries
The inclusion of this symbol on the product or packaging indicates that
this product must not be disposed of as general household waste. Moreover,
it is your responsibility to send the discarded equipment to the
designated waste electrical and electronic equipment collection point. The
collection and recycling of such waste equipment helps to conserve natural
resources and benefit human health. For more information about recycling
your waste equipment, contact your local city office, your household waste
disposal station, or the shop where you purchased the product.
Press: Vol.up;Press and hold: next song
LED Indicator
Power On: Blue LED flickering--waiting
for Bluetooth connecting; Blue LED
stays--Bluetooth connected;
Max/Min Vol:Blue LED quick flickering;
Charging indicator：Red LED is on
when charging,Red LED is out once
fully charged
Power Key: Press and hold 2s to power on
Playing music: Press--play/pause
System restoration : Long press the power
button for 8 seconds
Mode shift: quick double press:
Bluetooth mode-->Micro SD card play-->
Aux In play(loops)
(need insert Micro SD card+connect
Aux In cable)
Accept call key:
press to accept/end, press and
hold to reject
Press: vol. down;
Pres and hold: previous song
True wireless stereo function
1.TWS connection
Power on both HP S10 Pro , and both under disconnect status, choose one
of them and short press "+ - " at the same time once connected, the
other E8's LED will stays.
2.Let TWS speakers connect to Bluetooth device Go to the device's
Blutooth page, and find HP S10 Pro BT Speaker to connect, the LED will
stay.
3.TWS disconnect
Take each of them, press "+ -"at the same time, can disconnect TWS.
01.Let 2pcs HP S10 Pro BT Speaker connect,for the 1st one you press "+
-" , this one is the main speaker(left channel), and the other one is
the follow speaker(right channel).
02.Only support 2pcs speakers under TWS connection.
03.Will keep precious main/fellow relationship and reconnect TWS for
next time use.
04.Once TWS connected, fellow speaker's LED keeps stay, and main
speaker's LED indicates the status of play, pause, Bluetooth connection etc.
05.Under TWS, operate each of them, the other one has synchronous
operation.
Main Speaker Slave Speaker
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device
has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction
FCC ID: 2AUPZ-HPS10PRO