User's Manual

ManualsBrandsDongguan Koppo Electronics ManualsAudio EquipmentBluetooth headset

User Manual

■product name：Headset+ outer ring music Bluetooth headset

■apperance：

■As picture show：

1， LED indicator of lightoutside speaker。 2，on-off of outside speaker。 3，bluetooth LED indicator

light。 4， bluetooth power switch button 。 5，previous/VOL（+）。 6，Next/VOL（-）。 7，MICRO

USB socket。 8，Φ40mm 4Ohm 3W speaker。 9，earphone socket。 10，MIC

Summary of content (4 pages)

PAGE 1
User Manual ■product name：Headset+ outer ring music Bluetooth headset ■apperance： 1 2 3 4 5 6 7 8 8 9 10 00 ■As picture show： 1， LED indicator of lightoutside speaker。 2，on-off of outside speaker。 3，bluetooth LED indicator light。 4， bluetooth power switch button 。 5，previous/VOL（+）。 6，Next/VOL（-）。 7，MICRO USB socket。 8，Φ40mm 4Ohm 3W speaker。 9，earphone socket。 10，MIC 1
PAGE 2
■Basic specification Product size：200*190*80mm Net weight：225g Working voltage：3.7 V； Low batter indicator voltage：3.
PAGE 3
■bluetooth chip：VIMI 9621SF version：Bluetooth 3.0 Paring name：BT-592 Profile:A2DP，AVRCP，HSP，HFP RF carrier frequency：2402MHz-2480MHz Receiver distance：360°/ 10m； ■speaker 1 Speaker diameter：40mm； Impedance： 32Ω Rated power：100mW Frequency Response：150Hz～20KHz； Sensitivity：98dB±3dB； ■speaker 2 Speaker diameter：40mm； Impedance： 4Ω Rated power：3W Frequency Response：100Hz～20KHz； Sensitivity：95dB±3dB； ■MIC MIC sheet：Φ4*1.5mm Sensitivity：-42±3dB ■Battery Battery sheet ：3.
PAGE 4
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.