User's Manual

1、 Product function
2、 Matters needing attention
USB port for charging or Power Supply
Multiple sets of alarm
Dual alarm can be set for workday or weekday
Snooze
Coloured Sunrise simulation
Coloured Sunset simulation
Calendar&Time display
FM Radio
Bluetooth Player
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
Water and electricity are a dangerous combination.
Do not use this appliance in wet surroundings.
Do not let water run into the appliance or spill water
onto the appliance.
Warning
The appliance is suitable for mains voltages of 5V
and current of 2A.This appliance is for indoor use
only .
Caution
Place the appliance on a stable, level and non-
slippery surface. Do not drop the appliance or
expose it to heavy shocks.Do not use the appliance
at room temperatures lower than 10°C or higher than
35°C.Do not use this appliance as a means to reduce
your hours of sleep. The purpose of this appliance
is to help you wake up more easily. It does not
diminish your need for sleep.This appliance is only
intended for household use, including similar use
for instance in hotels.
3、 Structure diagram
①Light/Set ②Time setting/display brightness
③Fall asleep ④Alarm 2 ⑤Alarm 1 ⑥FM Radio
⑦Type-C input ⑧USB out ⑨ Display
display Buttons and USB*2
4、 Operating instructions
setting the clock
1.Press and hold The hour indication on the display
starts flashing to indicate that you have to set the
clock time.Rotary to set the minutes, Press
and Rotary can be quickly setting the hour.
2. Press the 12H/24H indication on the display
starts flashing, Rotary to set the12H/24H.
3. Press the year indication on the display
starts flashing, Rotary to set the year.
4. Press the data indication on the display
starts flashing, Rotary to set the month and
day, at the same time, the week changes with the
date.
5.Press the to confirm.
setting the alarm
Allow users to program 2 alarms based on individual
needs. Alarm 1 as the example.
1.Press and hold The hour indication and Alarm
① on the display starts flashing to indicate that you
have to set the alarm time.
Rotary to set the minutes, Press and
Rotary can be quickly setting the hour.
2. Press the sound indication on the display,
Rotary to choose the sound.(S00~S10)
Note:S00: the sound is turn off. S01~S09:natural
sounds. S10:the last FM radio.
3. Press the volume indication on the display
starts flashing, Rotary to set the volume
(V01-V16).
4. Press the minutes indication on the display
starts flashing, Rotary to set the lighting time in
advance(10min-60min).
5. Press the light indication on the display starts
flashing, Rotary to set the light brightness
(L00-L20).
6.Press the to confirm.
7. Press or , to switch the working state of
alarm ; They are all day alarm clock (Mon-Sun),
working day alarm clock (Mon-Fri), weekend alarm
clock (Sat-Sun) and alarm clock off.
snoozing
When the alarm clock 1 rings, press any button(Except
alarm2) to enter snooze , after 9 minutes, the wake-up
sound is automatically played again (5 times at most,
9 minutes each time); press "alarm 1 setting button" to
turn off alarm 1.When the alarm clock 2 rings, press
any button(Except alarm1) to enter snooze , after 9
minutes, the wake-up sound is automatically played
again (5 times at most, 9 minutes each time);
press "alarm 2 setting button" to turn off alarm 2.
When there is no operation after the alarm clock rings,
the alarm clock will be automatically turned off after
30 minutes.
setting the fall asleep
1.Press and hold The minutes indication on the
display starts flashing to indicate that you have to
set the fall asleep.Rotary to set the fall asleep
time, (10min-120min).
2. Press the light indication on the display starts
flashing, Rotary to set the light brightness (L01-L20).
3. Press the sound indication on the display,
Rotary to choose the sound.(S00~S09)Note:
S00: the sound is turn off. S01~S08:natural sounds.
S09:the last FM radio.
4. Press the volume indication on the display
starts flashing, Rotary to set the volume
(V01-V16).
5.Press the to confirm.
6.Press to turn on / turn off the fall asleep.
7.when fall asleep is turn on, Rotary to adjust
the light.Press to check the remaining sleeping
time. Rotary to adjust the volume. Press to
choose the sound.
setting the sunrise light
Press the light indication on the display,
Rotary to set the light brightness (L01-L20).
Press again to turn it off.
setting the colored light
Press and hold the light indication on the
display, Rotary to set the colored light
(C01- C07).
setting the display brightness
Press to adjust the brightness of the time
display, including high-grade, medium-grade, low-
grade and off. The default is high-grade.
setting the Radio
1.When FM is off, Press and hold , the radio
will enter the automatic station search mode and
store stations P01... Pxx. After station search, the r
adio station Pxx (the last station) will be played
automatically.
2. When FM is off, Press ,the FM indication
on the display, the radio turn on.
3. Press to switch the storage radio station,
Rotary to adjust the FM volume.
4. Press and hold the radio turn off.
Bluetooth audio
When the radio is suspended and the alarm clock
and fall asleep are not turned on, the mobile phone
is connected to Bluetooth to play music. Bluetooth
connection, the Bluetooth indication on the display.
5、 Cleaning and maintenance
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.Regularly remove dust from the
outside of the appliance with a dry cloth. Do not let
water run into the appliance or spill water onto the
appliance. Unplug the appliance before you clean it.
Clean the outside of the appliance with a dry cloth.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Wake-Up Light