User's Manual

Attention
Product View
Product Feature
Packing component
Specification
BT/TF/ FM mode
Volume +/-,previous(FM previous channel )and next songs(Fm next channel)
USB charging
Audio notification
Indicators
Bluetooth function
Please read the following attention for using correctly and keep the speaker life better
：
Please use the speaker in usually environment.
Hight altitude falling may destroy the speaker.
Please don’t try to tear the speaker by yourself,or cleaning it with chemical solvent.
Don’t use it loudly for long time in case to hurt your ears.
Please turn off the speaker if long time no use.
Model:
Size: 285*116*116mm
Bluetooth protocol : Bluetooth V3.0+EDR
Transmission range :﹤10M(transmission distance is different by different environmental)
USB charge: DC 5V
Speaker：2
Power: 2*5W
Audio source selection：TF &Bluetooth & FM
Frequency range：120HZ-18KHZ
Buit-in lithium abttery: 3.7V/1800mAh
Playing time: about 6hours(volume50%，affected by the volume and the audio content)
Lithium battery bulit in, please don’t through out or put it in fire
Can't connect the speakers
Ensure that speakers into pairing mode
Sure phone in a reasonable range of bluetooth use, under environment without sunscreen,
the largest bluetooth connection distance is about 10 meters
Restart and set the cell phone bluetooth pairing and connecting
Ensure that speakers into pairing mode. If the blue light is not flashing quickly, please restart
your speaker until the blue indicator light flashing rapidly to get into pairing mode again.
If the blue light is flashing quickly, show that speaker is in pairing mode.
Phone support A2HP protocol, Windows and apple system compatible bluetooth driver
If computer/phone/tablet system upgrades and hardware is not compatible, cause the
speaker bluetooth can't identify or is unable to use normally, seller afford irresponsible.
Unable to connect the computer to charge
Try to replace the USB cable or restart the computer.
power saving mode
Once connected ,audio didn't work in 10 minutes , bluetooth stereo get into deep sleep,
wake up must restart the power supply once.
When the device connected with the bluetooth devices , other phone unable to connect it.
when mobile phones connect to other bluetooth devices . For connection with this
equipment, please close the other bluetooth devices, and then restart it.
speaker（1pc）、quick start guide（1pc）、USB cable（1pc）
Operation
1. long press power button in the same time，BT LED flash quick and audio notification
(speaker get into BT mode automatically ).
1. get BT mode, speaker paired automatically last device in 30s. the BT LED shall be flash
quick when waiting for pair or no pair(smartphone different the connection shall be bit different)
1. Speaker switch to TF mode automatically when you plug TF card.
2. Signal source come from TF devices (MP3/phone/PC etc), enjoy your music.
2. open your BT device，searching speaker，smartphone shall show “ESB301 SPEAKER”.
get pairing, waiting for a while the BT Light always on then it paired, in the same time
audio notification.
3. enjoy your music after paired BT mode.
When playing, press
to get to play or pasue.
short press“ “or“ ”key then can get previous or next song.(only suit BT mould)
battery working time shall be different base on Vol, speaker wil power off automaticall when low power
shall be charged in time.need to charge at least one time per month to keep battery life
.
turn the Volume button then can adjust Volume down or up( “+” and “-”)
Volume adjust
through USB cable connect PC or any 5V DC adaptor to get charge.LED red when charing.charing
time about 4H. the red LED off when full charged.
the LED on the case flash when power on, speaker waiting for pair. speaker paired or
speaker working when the LED solid blue.
speaker in charging the battery LED red, red off then full charged.
FAQ
Sounds different
please check whether over the valid distance, or there are barrier between speaker and device.
How to connection
TF in Mode Operation
PLAY/PAUSE
Previous/Next
Charging speaker
LED Indicator
Battery
Handle
BT Light
Charging light
Vol +
Vol -
BT/TF/FM Mode
TF Card port
Charging port
USB port
Power on/off
Previous
Next
User Manual
Product Name:Bluetooth Speaker
Model Name:JWH-P5,P5
Manufacture:Dongguan Jin wen hua digital technology Co.,LTD.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
JWH-P5