AOK UI INTRUCTION for HX-P270 TABLE OF CONTENT Change history…………………………………………………………………………………………………………………………………………………………………………………2 1. Product setting…………………………………………………………………………………………………………………………………………………………………………………2 2. System feedback………………………………………………………………………………………………………………………………………………………………………………4 3. Product states………………………………………………………….
Change History Issue Date Handle by Comments 00 July-30-2015 Mir xie First release 1. Product setting: buttons, LEDs, Audio sources 2.1 Buttons and switches and Touch, the systems have below buttons: Power switch button, MFB, Vol+, Vol-, LED display functional button Button 2.2 Connection of Power and audio system, the system has the following connection: Audio port In Aux-in Out - Data port Power port - In DC jack Out USB out for charging 2.3 Button press Type and Duration.
Remember previous audio source NO Remember previous connected BT devices Yes, If Aux is not connected, always reconnect with last device which connected during power up Remember previous volume level Yes (only if volume <60%, use previous volume, else use 60%) 2 Power mode Supports Battery Mode? Yes Charging hour Within 2 hours Playback hour 4.2 hours at 70% volume without LED lighting 2.
9 Phone device Mac version MacBook (Pro, Air) with OS X 10.8.2 or later Phone model with OS version iPod touch (2-5 Gen), iPod Nano (7 Gen), compatibility iPhone (6,5, 4s, 4, 3Gs, 3G), iPad (1, 2, 3, 4, mini 1, 2), 2.5 Audio source, Available audio source Input: # Audio input 1 Line (3.5mm) In 2 Bluetooth Image 2.
3.2 List of Physical Visual Indications Product off, USB connected Indicator color Description Product LED null off Charging LED ● Solid as long as charging.
BT activity (The Flashing LED 0.2 seconds on and 0.2 seconds off) Event indicator color Description BT not active Product LED ● Aux as active audio source. BT pairing Product LED ● Speaker: Blue LED Slow flashing (0.2sec on, 0.2sec off) for 2min or until paired successfully.
Play/Pause States vs Press type SP (<0.5) LP >2~3s) Off Try me No response On Play or pause No response On-aux inserted Play or pause No response. BT on power up reconnect No response, Continue BT re-connecting No response BT on pairing No response. Continue BT Pairing No response. BT on connected Play/pause No response Brightness control States vs Press type SP (<0.5) LP >2~3s) Off No response No response On Change Brightness in turn No response.
5. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accept er tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en comprom ettre le fonctionnement.