User manual Model: F3 Brand: AOMAIS
Specification: Model:AOMAIS OUTDOOR Power(W):5W Size:3.74"*3.74"*1.57" Loudspeakers:Φ67mm Weight: SPL(mV):200mV BT Version:V3.0 THD:1% Volume max Waterproof Level:IPX7 Load Impedance(Ω):4Ω Charge Time:3 hours S/N(dB):≥70dB Playtime: Max Noise(mV):≤3mV Power Supply:3.7V Lithium battery Charge Voltage:5V/1A 1500 mAh Package Components 1*AOMAIS OUTDOOR 1*USB Cable 1*Aux-in Cable 1*Quick Start Guide Operations 1.Long press the button of Power,the blue indicator flashes quickly with voice prompt.
2.The speaker will be switched in Aux-in mode automatically once with Aux-in cable being inserted. A:Bluetooth mode operation: 1.Speaker will be paired with last device automatically in 30s.The blue indicator flashes quickly when the speaker is searching for Bluetooth could be paired.(The pairing time will be different depending on different devices) 2.Turn on the Bluetooth in your devices setting and select AOMAIS OUTDOOR until voice announced.The blue indicator flashes slowly once paired successfully.
1.Power:Long press the button to turn the speaker on and off. 2.Pause/Play/Hands-free:In playing mode,short press the button to pause or play music.When there is a call coming,short press the button to answer it and then press once to hang it up,long press it for about 2 seconds to reject answer it. 3.Language setting Press the previous(Volume+) and next(Volume-) tone button together,then will change the language 4.
on. BT indicator (Blue):The blue light flashes quickly means it haven’t connect the BT and flashes slowly once pairing is succeeded Line in indicator:The blue light flashes slowly when connected Charge indicator:The red light will flashed if the battery run low(3.6V) and will keep in red when charging.
mode.If the blue indicator is not flashes quickly,please restart the speaker till it is. Please ensure that there is no Aux-in cord is insert.Bluetooth is disconnected once with the Aux-in cord in.One speaker could be paired with one device once.That means that when you are going to pair the speaker with the second different device,you may have to turn BT of the previous one off or remove the speaker from the BT record. 3.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information to the user.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. * RF warning: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
