Product Manual

most wireless charging mobile phones on the market). If the charging indicator light flashes red
and blue alternately, it indicates that there is a metal foreign body in the charging position. After
the foreign body is removed (3 seconds), the blue light indicates that it can be charged normally.
5.Product technical parameters:
Power supply: DC 5V2A
Output power: 5W
Working temperature: 0°C~45°C
Precautions
a. This product must be used at rated voltage.
b. Do not leave this product in a high temperature and humid environment, please place it in a
dry place.
c. During maintenance, please wipe the product with a dry cloth. It cannot be cleaned with water,
alcohol, gasoline, or acid-alkaline detergent. if not
If metal objects or liquids are spilled into the product, cut off the power immediately and use it
only after inspection by professionals.
d. This product cannot be disassembled at will. If you need to repair it, please contact our
after-sales customer service.
e. This product is for indoor use only, it is recommended to use it within the ambient
temperature range: 0°C~45°C; humidity range: 30~70%RH.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the