Product Description

■■■■■©
H0_nAMM
launcher
English
Product description
1.2.4G key
5. Status Indicator
8. External microphone
2.7.1 Sound/Mic Mute/Effect Light
6. LINE-IN interface
9. Type-c interface
3. Switch button
4. Volume up/down
7. Built-in microphone
10. Charging light
Device plug: compatible with laptop/PC/PS4/PS5/TV/Switch
a) Insert the computer USB interface when using, plug and play wireless connection.
a.l) After the transmitter is plugged into the computer; the Windows system of the computer will
automatically connect without any need .The user installs the driver and additionally runs the
software.
a. 2) After inserting the transmitter into the USB port of the computer, the green indicator light of the
transmitter flashes at this time, and the "WT02" wireless headset device is displayed in
the device view on the computer as the installation is successful. Open the device "Sound and Audio
Device" when using it for the first time. Properties' Audio column is set to default.
b. Press and hold the headphone power button for 3 seconds at this time, the green light of the t ransmitter
and the green light of the headphone are always on, which means the connection is successful.
Note: The transmitter does not need to be paired. Just plug it in and use it in sync with the headset.
If it is lost or damaged, please contact the merchant to buy the original transmitter of the same model.
The new transmitter needs to be re-paired and connected with the headset
The operation steps are as follows:
1. After the transmitter is inserted into the device, follow the steps aland a2 above to connect.
2. In the 2.4G mode power-on state, press and hold the power button for 8 seconds to turn off the power,
then when the power-on light flashes quickly, then insert the USB Dongle close to it, the connection is
successful, and the green light is always on.
Line-in connection line use
Product parameter
Hom diameter
50 mm
Transmission distance
10 meters,360 degrees
Speaker impedance
20Q
Operating Voltage
3.7V
Battery capacity
600mAh
Charging voltage
DC5V-1A
Battery Type
Polymer lithium battery
Microphone sensitivity
-42±3dB
Charging time
3 hours
Microphone indicative
Omnidirectional
Battery life
> 10 hours
Low latency
<30MS
1. Device end plug: Compatible with PC/Laptop/Appareil ios/Appareil Android/PlayStation 4/PS Vita/ Xbox
one S/Xbox one X/devices with 3.5 audio interface.
2. External microphone use: plug in the external microphone to enable, the built-in microphone is turned off,
and the built-in microphone is turned on when unplugged.
Transmitter parameters
Working voltage
5V
Transmitting power
7 dBm
Working current
25mA
Transmission distance
10M,360°
Frequency range
2.402GHz-2.480GHz
Receiving sensitivity
-93d Bm
Bandwidth
1 MHz