Product Info

70.00
26.00
139.00
Loosen a screw
Speed indicator
Right
Brake
Left
Bind
Back
Speed
Forward
③.The remote control is not used for 10 seconds, it will enter the standby mode and press any key to wake up.
Press the "S" key to set the speed, ●
---low, ●●--- medium-speed , ●●●---high-speed
Press the "P" key Enter braking state , All LEDs flicker,Press this key again to exit the braking state
④.Key Description: " " Forward, " " Back," " Left, " " Right, " S " Speed, " P " Brake.
WARNING! Not for children under 3 years. Small parts. Choking hazard
-Load two AAA ( 1.5V ) batteries according to the diagram.
-Non-rechargeable batteries are not to be recharged.
-Different types of batteries or new and used batteries are not to be mixed.
-Batteries are to be inserted with the correct polarity.
-Exhausted batteries are to be removed from the toy.
-The supply terminals are not to be short-circuited.
-The packaging must be retained since it contains important information.
Load two AAA(1.5V) batteries
2.4G Remoter Control Instructions
2.4G Remote control instructions
Frequency binding is required for the first use
①.Long press "M" key for 3 seconds start frequency bind, until the first LED flicker
②.Turn on the vehicle power now, The LED stop flicker, Description frequency bind is successful.
and press any key to wake up.
③.The remote control is not used for 10 seconds, it will enter the standby mode
Press the "S" key to set the speed.●---low.●●--- medium-speed .●●●---high-speed
Press the "P" key Enter braking state , All LEDs flicker,Press this key again to exit the braking state.
④.Key Description: " " Forward, " " Back," " Left, " " Right, "S" Speed, "P" Brake.
Frequency binding is required for the first use
①.Long press "M" key for 3 seconds start frequency bind, until the first LED flicker
is successful.
②.Turn on the vehicle power now, The LED stop flicker, Description frequency bind