User's Manual

Model No.: M8 Bluetooth Earphone
2. Please use standard charger to charge the
earphone in case of causing battery damaged.
power on/power off
volume up/previous song
USB charging port
M8
volume down/next song
Long press the button of the earphone to
turn on until the red and blue light flash
alternately, it gets into pairing mode.
HD MUSIC BLUETOOTH EARPHONE
USER MANUAL
NOTES !
1. Please read the manual carefully before
using the earphone, and operate strictly
according to the requirements.
3. Please keep away from fire when using the
earphone.
4. Please do not make the ports bloked, such
as charging port, LED and earphone, etc.
5. Please don't use the earphone at high
volume or for a long time. Avoid affecting the
user's hearing.
6. Please do not disassemble the earphone
for any reason.
7. Please do not clean the earphone with oil
or other corrosive cleaning agents.
8. Please do not use the earphone in
potentially dangerous places.
FUNCTION INSTRUCTIONS
QUICK PAIRING
First Step
Second Step
Open the bluetooth device from mobile
phone, and searching the pairing name
“M8” to pair.
Others Pairing
The earphone will Auto connect with mobile
phone if already connected last time.
1.Anwser 2 . Hang up
BUTTON FUNCTIONS
Click on/off button
Click “+”
Long press 3s: Power on
3.Play music 4.Pause music
Click“-”
volume up volume down
Long press +
Long press -
Next song Previous song
Long press on/off button
A call coming in: Long press 2s to reject
SPECIFICATIONS
Bluetooth version:V5.0
Battery capacity:
100mAh
Driver Unit: 10mm
Charging time:
around 1.5H
Frequency Response:
20~20kHz
working range:
up to 10m
Earphone weight: 22g
Language; English
Bluetooth protocol: A2DP/ HFP/ HSP/ AVRCP
ACCESSORIES
Bluetooth earphone * 1
User manual * 1
Long press 5s: Power off
USBcharging cable * 1
Eartips * 1
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. Any changes or modifications
not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced
radio/TV technician for help. To maintain
compliance with FCC’s RF Exposure
guidelines, This equipment should be
installed and operated with minimum distance
between 20cm the radiator your body:
Use only the supplied antenna.
does cause harmful interference to radio or
television reception, which can be determined
FCC WARNING
FCC ID: 2ATQ9-M8