Instruction Manual

IV. Product Maintenance
4.1 Side Brushes Cleaning
When the side brush becomes dirty, please wash the side brush with water. If the side brush has
been damaged, it can be replaced.
4.2 Dust Box and Filter Screen Cleaning
After use every time, please timely clear and clean the dust box, filter screen. The specific
operation is shown in the following figure:
A B
F
C
G
D
★ Tips:
After taking out the dust box, please check whether there is any foreign matter in the suction inlet
and clean.
The filter screen can be flapped to remove dust. If it is wet out by the water, please be sure to dry
before installing.
4.3 Sensor and Charging Dock Electrode Slice Cleaning
Gently wipe the sensors and electrode slices on the bottom of the machine with a cleaning tool or a
soft cloth.
★ Tips:
If there is any foreign matter on the Dock Electrode Slice of charging base, it should be cleaned in time.。
E
Sensor
Charging Dock
Electrode Slice
Sensor
Sensor
Charging Dock
Electrode Slice
15 Instruction Manual for Robot Sweeper