Instruction Manual

5. Automatic Cleaning
Automatic Cleaning Mode is suitable for cleaning the whole house. In the automatic cleaning state,
the blue light of the machine flashes.
1.After the machine starts, firstly scan and identify the environment, establish the cleaning area and
plan the cleaning path;
2.Then, according to the planning area, use the arched path for cleaning, and automatically avoid
obstacles and steps, etc.;
3.Set up the cleaning path map in real time to clean with planned path, to ensure that all areas can be
cleaned;
4.After the cleaning of each area is completed, the machine will automatically return to the charging
base to charge, according to the path.
6. APP Operation and Use
Automatic Cleaning Mode Cleaning Path
Description of main interface function keys:
• Auto: Auto Cleaning Key, after starting up, the machine will give a voice
prompt of "Automatic Cleaning" in place, which is similar to the function of the
host machine turn on/off key and the AUTO key of remote control;
• Edgewise: Edgewise Sweep Key, the machine will give a voice prompt of
"Edgewise Sweeping", after the machine cleaning along the edge for a week,
there will be voice prompt "Cleaning Completion";
• Fixed Point: Fixed Point Cleaning Key, voice prompt "Fixed Point Cleaning",
the machine starts to do spiral expanding circular cleaning at the original point,
and returns to the origin point after expanding to a range of 1m in diameter;
•Recharge: Auto Recharge Key, similar to the recharge key of the host machine
and the HOME key of the remote control;
• Map: Machine cleaning map can be checked;
• Find the machine: Click the key, the machine will automatically announce
"I'm here" to remind;
Click "More" to open the interface as shown in the right picture:
• Consumables: Record and evaluate the use of middle brush, side brush and
filter screen;
• Sweeping Record: Record the recent machine use record;
• Timing: Scheduled cleaning function, can set at any time of 24 hours a day, 7
days a week, and can set repeatedly;
• Suction Selection: Adjust the suction gear of fan, to increase the effect of
cleaning and vacuuming, but the suction gear is proportional to the machine
noise, need to adjust as needed;
• Water Yield Adjustment: Adjust the speed of water leakage in the water
tank, which is not applicable to this machine at present;
• Breakpoint Continuous Sweep: If the machine has not finished cleaning,
the battery has no power, the machine will be automatically recharged, after
fully charged, and then continue to clean previously unfinished tasks;
• Static Switch: Turn off the machine voice broadcast function.
Instruction Manual for Robot Sweeper 12